Escondido
Home BaseOur shop is here, on Venture St. Inland hillside lots, pools and side gates.
→Modern Fence & Deck builds aluminum and steel fences, manual side, pedestrian and pool gates, and block and gabion walls from our shop at 426 Venture St in Escondido. We work across San Diego County, and each city page below covers that city's fence height, permit and pool-barrier rules, with links to the sources.
Each page covers one city's fence height, permit and pool rules as of September 2026, with the site conditions that shape a fence there.
Our shop is here, on Venture St. Inland hillside lots, pools and side gates.
→Coastal and La Costa lots, and our ipe and wire-mesh fence project.
→Leucadia and Cardiff to Olivenhain acreage.
→A 42-inch front-yard limit, bluff setbacks and Coastal Commission review.
→A building permit for any fence over 12 inches, plus design review.
→Estate frontages and Covenant design review.
→A City planned district, HOA guidelines and pool gates.
→Hillside, canyon-edge and horse properties.
→Canyon-edge lots and Zone 0 planning near the house.
→Hillside neighborhoods, its own fence code, local Zone 0.
→Road-setback limits, large lots and a local Zone 0 rule.
→42-inch front yards, coastal-zone rules and salt air.
→Rancho Bernardo, 4S Ranch, Del Sur and Rancho Peñasquitos.
→Acreage and horse properties under County zoning.
→Each city page links to its section of our fence rules guide, which compares heights, permits, pool barriers and Zone 0 status across twelve jurisdictions.
Aluminum, steel, custom gates, and walls, planned around each property. Aluminum and steel are noncombustible base materials often evaluated in fire-conscious perimeter planning; requirements vary by address and jurisdiction, so confirm with your local fire authority (AHJ). See our Zone 0 Fence and Gate Planning overview.
Architectural-grade 6063-T6 aluminum with durable finishes. Non-combustible metal options with documentation available on request. Warranty options vary by product.
Hot-dipped galvanized steel with powder coat. Security-focused and non-combustible when properly specified. Fabrication standards vary by project.
Composite lines with ASTM E84 test reports; ratings vary by product. A wood look for runs where fire exposure allows, since composite is combustible.
CMU walls provide non-combustible barriers. Fire performance depends on wall assembly, height, and local requirements.
Stone-filled galvanized steel mesh. Non-combustible natural materials with a layered, textured face.
Manual aluminum and steel side, pedestrian, pool, courtyard, and security-conscious gates, matched to the fence or wall. Post sizing, latch hardware, and gate-and-fence continuity are planned together.
Dense hardwood for screens away from the house. Combustible; some products have ASTM E84 Class A test results. Local acceptance varies by AHJ.
Galvanized steel planters fabricated to size for courtyards, entries, and the planting edge along a fence or wall.
In the City of San Diego, Fire-Rescue Standard D-2 requires new fences and gates within 5 feet of a new home in a Very High Fire Hazard Severity Zone to be noncombustible, with a 5-foot noncombustible span where a fence attaches. The unincorporated County's WUI Code counts fences within 5 feet of a dwelling as structures. Other cities set their own rules; our fence rules by city page compares them.
Enter the address in our Zone 0 address checker, which reads CAL FIRE's public Fire Hazard Severity Zone maps for San Diego County. The official designation comes from CAL FIRE's FHSZ maps and your local fire authority.
Ask for the product's test report: ASTM E136 for noncombustible materials such as aluminum and steel, or ASTM E84 for a flame-spread class on composite or wood. We supply product-specific reports on request and confirm acceptance with your local AHJ.
Insurance treatment varies by carrier and policy. Fire hardening may help, but discounts or eligibility are not guaranteed. Confirm details with your insurer.
Aluminum is noncombustible under ASTM E136, so the fence itself is not fuel, and it is one of the materials City of San Diego Standard D-2 names for new Zone 0 fences. Performance near the house also depends on the attachment detail and what grows along the fence; confirm acceptance with your local AHJ.
Request a fence and gate estimate for your San Diego County property. We walk the site, talk through fire-conscious material options, and follow up with a written proposal.
(619) 975-1883Geranium Street USA, Inc. dba Modern Fence & Deck · CA Contractor License #955154