Horizontal Slat Fencing
Tightly spaced slats give a modern, semi-private run. Wider gaps let more light and breeze through.
We design and install aluminum fences, from horizontal-slat privacy runs to picket and pool-barrier lines, with matching manual gates. Each project is planned from our Escondido shop for homes across North County and the rest of San Diego County. The main decision is the infill: full privacy, partial screening or open pickets, then a finish matched to how close the fence sits to the ocean.
Every style below uses the same 6063-T6 aluminum. What changes is how much the infill screens, so decide the privacy level first and the look second.
Tightly spaced slats give a modern, semi-private run. Wider gaps let more light and breeze through.
Wide boards or solid panels for full screening along a neighbor line or a street-facing side yard.
Open pickets for frontages, views and pool enclosures where seeing through the fence matters.
Aluminum pool barriers with self-closing, self-latching gates, planned to the barrier rules for your address. See pool fencing.
Short runs with a matching pedestrian gate for the trash, AC and dog corridor beside the house.
Longer runs on larger lots, stepped to follow the grade, with manual pedestrian gates where people come and go.
Usually, yes. Powder-coated 6063-T6 aluminum does not form red rust, so it is the first material to consider within sight of the ocean; steel can work there too, but it needs galvanizing under the powder coat and more frequent touch-ups.
How a coastal fence ages depends as much on the finish and hardware as on the metal. We choose the powder-coat system, fasteners and hinges for the exposure, and the finish specification is confirmed per project. For more on coatings, see how powder coat holds up in San Diego.
Aluminum is non-combustible (ASTM E136), so it adds no fuel along the fence line. That matters most within 5 feet of the house. In the City of San Diego, Fire-Rescue Standard D-2 requires new fences and gates in that zone to be non-combustible for new homes in Very High Fire Hazard Severity Zones, and aluminum is one of the listed materials (as of September 2026).
Aluminum is not a complete fire-protection system, and the final say rests with your fire authority. See Zone 0 fence and gate planning, our Zone 0 aluminum fence guide, and the fire ratings overview.
We plan the gates with the fence. Pedestrian and side-yard gates use the same profile and top line as the run, and pool gates are laid out around self-closing, self-latching hardware without breaking the line. We build manual gates only, not driveway or automated gates.
See custom gates in San Diego, aluminum pedestrian, side-yard, and pool gates, side gates in San Diego, and pool fencing and gates.
We also build in steel, hardwood and composite, so there is no reason to push aluminum where it is not the right answer.
More detail: fence material comparison, aluminum vs steel fencing, steel fence installation in San Diego, and ipe hardwood fencing.
The profiles are extruded from 6063-T6, an architectural aluminum alloy that is heat-treated after extrusion for stiffness and takes a powder coat cleanly. Posts, rails, pickets and boards are hollow sections, and aluminum weighs about a third as much as steel, which keeps long runs and gates light. Finish documentation is available by product, and the finish, post size and footing depth are confirmed per project for the height, terrain and wind exposure. Alloy data, fire classifications and documentation status are on our technical data page.
Where a permit, HOA or design review may apply, we check what applies at your address; final approval rests with the City, the fire authority or the HOA.
We walk the run with you: grade, drainage, sightlines, gate locations and how close the fence comes to the house.
Post locations, height steps and gate openings are set, and the profile, finish and hardware are chosen for the exposure.
Panels and gates are cut and assembled to your layout, not pulled from a shelf and trimmed in the field.
Posts are set, panels hung and gates adjusted, and we walk the finished run with you.
Where we build: from our shop in Escondido across North County, including Carlsbad, Encinitas, Poway, Rancho Santa Fe, Solana Beach, Del Mar, Carmel Valley and Scripps Ranch, and the rest of San Diego County, including La Jolla and Coronado. Height and permit limits by city: fence rules in San Diego County.
Cost depends on fence height, layout, finish, privacy level, site access, slope, gates, demolition, and custom fabrication requirements. A site-specific estimate is the best way to price the project accurately.
Very little. Rinse it periodically to clear salt and dust, more often within sight of the ocean, keep sprinklers and soil off the bottom rail, and touch up chips in the coating when you see them. There is no sanding, staining or sealing.
Yes. Panels can be stepped down a slope in level sections or, in some styles, racked to follow the grade. Stepped runs leave small gaps under each panel, which matters for pets and for pool barriers, where California limits the gap under the enclosure to 2 inches.
It depends on the city, the height and whether the fence is a pool barrier. As of September 2026, the City of San Diego does not require a building permit for fences under 7 feet unless they serve as a pool barrier, and Carlsbad exempts residential fences up to 6 feet. Front-yard height limits are lower, so check fence rules by city for your address.
Tell us about the property — coastal exposure, hillside grade changes, gate runs, and the architectural look you’re after. We’ll plan a corrosion-conscious finish and layout that fits the site. Final specification depends on the site walk and written proposal.
When the project needs estate-grade mass, security weight, or substantial manual pedestrian gate work, steel earns its place alongside aluminum.
Designed TogetherManual pedestrian, side-yard, and pool gate systems designed alongside the fence, not added later.
Full PerimeterThe complete service line for San Diego properties: aluminum, steel, composite, hardwood, walls, and gates.
Also built: composite fencing, block walls and gabion walls.