Back to custom gates in San Diego
Coastal · Modern · Low Maintenance
San Diego County

Aluminum Pool Gates in Coastal San Diego

We design and build aluminum pool, side-yard and pedestrian gates matched to your aluminum fence, for homes across North County and the rest of San Diego County from our Escondido shop. For a pool gate the deciding detail is the hardware: it has to open away from the pool, self-close and self-latch, with the latch at least 60 inches above the ground.

  • LicenseCSLB #955154
  • Service AreaSan Diego County
  • MaterialAluminum (Powder Coat)
  • Common UseCoastal · Pool · Side-Yard · Modern
  • EstimatesOn-site, by appointment
LicenseCSLB #955154
Service AreaSan Diego County
EstimatesOn-site, by appointment; most are free
HoursMon–Fri, 8am–6pm
Built for the coast and the everyday yard

When the gate has to live near salt air, aluminum is the quiet answer.

Near the coast, aluminum is usually the right gate: it does not form red rust, and it is light enough to be easy on self-closing hinges. Steel still wins where the gate has to be heavier or carry security hardware, and the finish specification is confirmed per project. See all custom gates in San Diego.

Anatomy of an aluminum gate

Hollow profile.
Architectural strength.

Aluminum gate sections are built from extruded hollow profiles. The frame holds its shape, the infill is precisely spaced, and the finish is bonded into the metal instead of sitting on top of it.

Aluminum gate frame detail Elevation of a horizontal-slat aluminum gate labelling the aluminum post, extruded aluminum picket slats, the latch and strike, and a magnified cross-section showing the hollow extruded profile that keeps the gate corrosion-resistant and lightweight. Aluminum post Extruded aluminum picket HINGE SIDE Latch + strike HOLLOW EXTRUDED PROFILECorrosion-resistant ยท lightweight
Aluminum gate frame โ€” extruded picket slats, hinge side, latch + strike, and the hollow extruded profile that keeps it corrosion-resistant and light.
Aluminum gate applications

Aluminum Gate Applications for San Diego Homes

What we build in aluminum, by use.

01

Aluminum Pool Gates

California requires pool enclosure gates to open away from the pool, self-close, and self-latch with the latch at least 60 inches above the ground (Health and Safety Code §115923, as of September 2026). See pool fencing.

02

Aluminum Side-Yard Gates

A common aluminum gate application. Lightweight, low-maintenance, and easy to match to an aluminum fence.

03

Aluminum Pet & Family Gates

Self-closing hinges and a magnetic or gravity latch keep a dog or a toddler from wandering out. Keep the gap under the gate small.

04

Aluminum Pedestrian Gates

Walk-through aluminum gates for courtyard entries, garden paths, and front-yard pedestrian access.

05

Aluminum Privacy Gates

Wide-board or tight-slat aluminum infill for full or semi-private screening at side yards and front yards.

Material decision

Aluminum vs Steel for Gates

For many coastal and modern San Diego gate projects, aluminum is the better fit. For others, steel may be the stronger choice.

Material

Aluminum

Best for
Coastal homes, pool gates, side-yard gates, pedestrian gates, modern privacy gates, low-maintenance design.
Watch-out
Less suited when the project requires a heavier frame, stronger structural support, or a more substantial gate presence.
Material

Steel

Best for
Heavier security-oriented gate frames, security gates, gates that match a steel fence, properties where mass is the design intent.
Watch-out
Needs proper corrosion protection and finish planning, especially near coastal exposure.

We build manually operated gates only โ€” for driveway or automated gate operators, a specialized gate-operator contractor is the right fit. For the broader picture see aluminum fence installation in San Diego and steel fence installation in San Diego.

What we plan before fabrication

Aluminum Gate Design Details

Aluminum gates are detail-driven. None of these are afterthoughts.

  • GeometryOpening width & heightSized to the actual property and use.
  • GeometrySwing directionWalk-gate swing planned around clearance and slope.
  • StructureFrame profileExtruded aluminum hollow profile sized to span.
  • StructurePosts & footingPosts sized to the gate weight and use.
  • InfillHorizontal slatsModern signature; spacing decided per privacy goal.
  • InfillVertical picketsCleaner traditional or pool-code option.
  • InfillPrivacy boardsWide-board or solid panels for full screening.
  • HardwareHingesSelf-closing, standard, or heavy-duty per use.
  • HardwareLatch & lockMagnetic, gravity, keyed, or pool-code latch where required.
  • FinishPowder coatDurable powder-coat color matched to the home and the exposure.
  • IntegrationMatch to aluminum fenceProfile, color, picket rhythm tied to the surrounding fence.
  • HardwareSelf-closing hardwareSelf-closing hinges and latching for pool gates where required.

Where we build: from our shop in Escondido across North County, including Carlsbad, Encinitas, Poway, Rancho Santa Fe, Solana Beach, Del Mar, Carmel Valley and Scripps Ranch, and the rest of San Diego County, including La Jolla and Coronado.

From first walk to final latch

Our Aluminum Gate Design and Installation Process

A typical project runs in four stages. Where a permit, HOA or pool inspection applies, final approval rests with the City or the HOA.

  1. 01

    Site Walk-Through

    Review the opening, exposure, slope, existing fence and how the gate is used.

  2. 02

    Profile, Hardware & Finish

    Choose slats, pickets or privacy boards, then the hinges, latch and powder-coat finish.

  3. 03

    Fabrication

    The gate and posts are built to the opening in our Escondido shop.

  4. 04

    Installation

    Posts are set, the gate is hung and the swing and latch are adjusted, and we walk it with you.

Common questions

Aluminum Gates FAQs

Can an aluminum gate match my existing aluminum fence?

Yes. An aluminum gate can be built to match your existing aluminum fence, using the same frame profile, picket spacing, and powder-coat finish so the gate and fence read as one system.

Are aluminum gates fire-resistant?

Aluminum is a non-combustible base material, which can make aluminum gates useful in fire-conscious gate and perimeter planning. It is not a complete fire-protection system on its own. Final requirements depend on site conditions, adjacent materials, code, AHJ expectations, carrier requirements, and written scope.

How much does an aluminum gate cost in San Diego?

Aluminum gate cost depends on size, configuration, finish, hardware, post requirements, slope, demolition, and site conditions. A site-specific estimate is the best way to price the work accurately.

Plan an Aluminum Gate That Fits the Property.

Aluminum is a coastal-friendly, low-maintenance material with the right architecture for modern San Diego homes. We plan the profile, finish, hardware, and fence connection so the gate is built for the property, not pulled from a catalog.

Or call (619) 975-1883.

Pair your aluminum gate with

Related Services for San Diego Properties

Hub Page

Custom Gates in San Diego

Browse the full set of custom side-yard, pedestrian, pool, and security gate work for San Diego properties.

Everyday Access

Side Gates in San Diego

Side-yard gate planning for pets, pool areas, trash access, utility spaces, and daily property circulation.

Controlled Access

Security Gates in San Diego

Security gate planning for controlled access, privacy, pedestrian entries, and security-conscious San Diego properties.

Strength & Security

Steel Gates in San Diego

Steel gate systems for estate entries, security-conscious access, and matching steel fence systems.

Steel Alternative

Steel Fence Installation in San Diego

Steel fence planning for projects where strength, security, or a heavier architectural presence matters more than weight savings.

Call (619) 975-1883 Site Review